Lower Side Moulding / Trim: Service and Repair

Assembly Overview





1 - Front door protective side molding
- Left and right-hand protective side moldings have different hole patterns
- Self-adhesive
- Material: PP/EPDM
- The locating tabs -3- and -4- position the moldings
2 - Pins
- Stop twisting of molding
3 - Locating tab
4 - Locating tab
5 - Pins
- Stop twisting of molding
6 - Rear door protective side molding
- Left and right-hand protective side moldings have different hole patterns
- Self-adhesive
- Material: PP/EPDM
- The locating tabs -3- and -4- position the moldings
7 - Protective foil


Replacing
- Warm side protective molding with hot air blower before removing.
- Clean exterior panels with solvent, treat with silicone remover and then rub dry.
- Pull protective foil from back of molding and attach molding lightly. Press molding on forcefully.

NOTE: The working temperature when attaching the moldings must be approx. 20 °C (68 °F).