Programming and Relearning

Code Control Module (Function 07)

Use this function to code the Multi-function Steering Wheel (MSW) electronics according to various equipment variations available.

Coding

- Connect VAG 1551 Scan Tool (ST), input address word 16 "Steering wheel electronics" and then press -> button, until "Select function XX" is shown in display.

Indicated on display (select function):


Rapid data transfer Help
Select function XX


- Press buttons -0- and -7- to select "Code control module" function 07".
- Press -Q- button to confirm input.
- Indicated on display:


Coding control module
Enter code number XXXXX (0-32000)


- Check/enter applicable code number from code table using model and equipment particulars.

Code table

Code Number Designation
00007 Radio (only)
00008 Radio & cruise control system (CCS)

Coding example: 00008 = vehicles fitted with radio and cruise control system.

- Indicated on display (example only):


Coding control module Q
Enter code number 00008 (0-32000)


- Press -Q- button to confirm input.

Indicated on display (select function):


Rapid data transfer HELP
Select function XX


Check DTC memory after coding, and erase any DTCs stored.

- End output (function 06).