EVAP Emissions System Components, Removing and Installing

Evaporative Emission (EVAP) System Components, Servicing


NOTE:
- Components marked with an * are checked by the On Board Diagnostic (OBD).
- Components marked with ** are checked by the Output Diagnostic Test Mode (DTM).







1 - Leak detection pump -V144
- at EVAP canister
- In rear left wheel housing below wheel housing liner
2 - Connector
- G3 pin
3 - Vacuum pipe
- Press together at front to release
4 - Vent pipe
5 - To EVAP canister purge regulator valve (N80)
6 - EVAP canister
- In rear left wheel housing below wheel housing liner
7 - 10 Nm
8 - 3 Nm
9 - Air cleaner for leak detection pump
10 - Connecting hose
- Suction side
11 - Connecting hose
- Pressure side