Brake Light Switch: Adjustments

Brake light switch, adjusting
^ Pull out brake light switch plunger to full extension.
^ Keep brake pedal in up position
(IMPORTANT! hold pedal up if necessary while installing switch).
^ Guide switch through mounting hole (only fits in one position).
^ Seat switch fully into opening (pressing plunger against pedal to adjust.
^ Seat switch by turning it 45° clockwise. This action also turns the plunger shoe into the correct orientation to make electrical contracts in switch operate as well as locks in plunger adjustment.
^ Connect brake light switch connector.
^ Operate brake pedal to verify proper function.
^ Reinstall lower cover panel.