Crankshaft Main Bearing

Main Bearing Cap Bolts
Assembly
Tighten 65 Nm (48 ft lb) + 90°
To measure radial clearance
Tighten 65 Nm (48 ft lb) but NOT additional 90°
Main Bearing Tightening Sequence, Refer to Procedure
Service and Repair

Crankshaft
Axial clearance:
New 0.07...0.23 mm
Wear limit 0.30 mm
Check radial clearance with Plastigage
New 0.01 0.04mm
Wear limit 0.15 mm
^ Do not rotate crankshaft when checking radial clearance

Crankshaft dimensions (in mm)

Honing Main Journal Conrod Journal
Dimension Diameter Diameter

Basic Demension 53.983...53.963 47.778...47.758

1st Undersized 53.733...53.713 47.528...47.508

2nd Undersized 53.483...53.463 47.278...47.258

3rd Undersized 53.233...53.213 47.028...47.008