Heating and A/C Controls W/Climatronic Control Module

A/C Control Head -E87- With Climatronic Control Module -J255-, Removing And Installing


CAUTION!
- Before working on the electrical system, obtain radio security code and disconnect battery Ground (GND) strap.
- When reconnecting battery, always check operation of vehicle equipment such as radio, clock, and power windows.


NOTE: Climatronic control module -J255- and A/C control head -E87- are integrated into a single unit and cannot be serviced separately.

Removing







- Using a screwdriver with a protected tip, carefully unclip control head trim at locations indicated by -arrows-.







- Remove instrument panel screws -arrows-.
- Pull A/C control head/control unit from instrument panel opening.
- Disconnect electrical connections on rear of unit.
- Remove A/C control head with control unit.

Installing
Code Control module, Function 07, then initiate Basic setting, Function 04, with VAG 1551 Scan Tool (ST); Climatronic, On Board Diagnostic (OBD).