Connecting Pipe and Combi-Valves - Assembly Overview

Connecting Pipe and Combi-Valves-Assembly Overview






Note: Components marked with an * are checked by the On Board Diagnostic (OBD)

- Components marked with **are checked by the output diagnostic test mode:
- Secondary Air Injection (AIR) pump relay -J299**

1. Left combi-valve
- Checking
2. Gasket
- Always replace
3. 10 Nm
4. 25 Nm
5. Y piece
6. Secondary -Air Injection (AIR) Solenoid valve - N112-*/**
7. 6 Nm
8. From vacuum reservoir
- Location: In left wheel housing
9. Right combi-valve
10. Gasket
- Always replace
11. Connection
12. Gasket
- Always replace
13. Pressure hose
- Ensure seated tightly
- Press together at front to release
14. O-Ring
- Always replace
15. Connecting - pipe
16. Connection