With Manufacturer Scan Tool

Check DTC Memory

Indicated on display


Rapid data transfer HELP
Select function XX


- Press keys -0- and -2- (the function "Check DTC Memory" is entered with 02).

Indicated on display


Rapid data transfer Q
02 - Check DTC Memory


- Press Print key.
- Confirm with -Q- key.

The number of stored DTCs appears in the display.


X DTCs recognized!


The stored DTCs are displayed and printed out one after the other.

- Enter DTC table at DTC printed out and repair.

If "No DTC recognized" is displayed the program will return to the initial position after pressing the -> key.


No DTC recognized! ->


Indicated on display


Rapid data transfer HELP
Select function XX


- End output (function 06).
- Switch off ignition and separate diagnostic connections.


NOTE:
If a DTC is recognized:
- Repair malfunction.
- Erase DTC memory (function 05).
- Check DTC memory again (function 02).