Disassembling and Assembling

Selector mechanism cover, disassembling and assembling
Disassembling
- Remove cover.





The four retaining tabs -arrows B- must not be removed from the printed circuit. The printed circuit will otherwise be damaged.





- Carefully lever off retaining tabs -arrows-.





- Remove cover strip -2- from guide -3

Assembling
- Check whether the solenoids -arrows are secured on the cover strip -2-.
If this is not the case, the cover strip must be replaced.
- Place cover strip -2- in guide -3-.





- Carefully engage cover strip with guide -arrows-.
If the tabs are damaged the respective component must be replaced.
- Install cover.