Clutch Hydraulic System: Service and Repair

Hydraulic components, assembly overview
1 - Brake fluid reservoir
2 - Supply hose
3 - Clutch master cylinder
4 - Bearing bracket
^ Only replace with clutch master cylinder removed
^ Remove, Refer to to Fig. 1
^ Install, Refer to to Fig. 2
5 - Clutch pedal
6 - Hex nut, self- locking 25 Nm
^ Always replace
7 - Oil seal
^ Always replace
^ Pull onto line/hose connection
^ Moisten with brake fluid before installing
8 - Line/hose assembly
^ Check Parts Supplier for application
9 - Bracket
^ Secured to body
10 - Oil Seal
^ Always replace
11 - Bleeder
12 - Oil Seal
^ Always replace
^ Pull onto line/hose connection
^ Moisten with brake fluid before installing
13 - Clip
^ To remove and install line/hose assembly, pull out clip onto stop
14 - Bleeder valve
15 - Protective cap
16 - Clip
^ To remove and install line/hose assembly, pull out clip onto stop
17 - Slave cylinder
18 - Clip
^ To remove and install line/hose assembly, pull out clip onto stop





Fig. 1 Remove retainer -A- by prying in direction of arrow





Fig. 2 Install clutch master cylinder operating rod in retainer -A- (direction of the arrow)