Fuel Supply System Components, Removing and Installing

Fuel Supply System Components Removing and Installing Notes

NOTE:
- Hose connections are secured with either spring-type or clamp-type clips.
- Always replace clamp-type clips with spring-type clips.
- Fuel hoses in engine compartment must only be secured with spring-type clips. The use of clamp or screw-type clips is not permissible.
- Assembly tool VAS 5024 or hose clip pliers V.A.G 1921 are recommended for installing spring-type clips.


Removing and installing fuel tank with its attachments and fuel filter.
Observe safety precautions.
Observe rules for cleanliness.
Observe crash fuel shut-off.
Checking electronic accelerator control (E-Gas). Refer to "EPC System Function", Description and Operation
Servicing parts of the evaporative emissions system.