ABS ITT Mark 20 IE System

Safety precautions
^ The ABS is a vehicle safety system; the appropriate knowledge is necessary to work on the system.
^ In order to check complaints and to be able to carry out pin-pointed troubleshooting, the Diagnostic Trouble Code (DTC) memory must be checked before beginning work on the ABS system.
^ Only separate connectors when the ignition is switched off.
^ Observe the appropriate instructions regarding the handling of brake fluid.
^ ABS malfunctions are indicated by the ABS warning light illuminating. Certain malfunctions will only be recognized at speeds above 20 km/h (approximately 13 mph) (carry out road test).
^ If the ABS -K47- and the warning light for brake system -K118- do not light up, but the brake system is not functioning correctly then the malfunction must be sought in the conventional braking system.

Necessary technical information
Electrical diagrams
Brake system service procedures