Charge Air Intercooler & Air Ducting

Charge Air Cooling System Components, Removing And Installing






NOTE: All hose connections are secured with clamps.
Charge air system must be properly sealed.
Note assembly markings at hoses and components during installation.
Note installation position of heat shield mats

1. Air ducting
2. 10 Nm
3. Charge Air Pressure Sensor -G31-
4. O-ring
Replace

5. Rubber grommet
With sleeve

6. 10 Nm

7. Intake hose
between intake manifold and charge air cooler

8. Heat protection mat
Observe installed position

9. Screw clamp
only vehicles with engine code AWD
Vehicles with engine code AWP, AWW with quick-release connection (with O-ring and securing brace)

10. Connection pipe/hose
11. Air duct
12. Bracket
13. Connection pipe/hose
14. Charge air cooler