Removing Slotted Guide Rail

Removing Slotted Guide Rail

- Removing glass panel for sunroof.
- Removing installation unit.
- Removing drive motor for sunroof.







- Unclip end piece - 1 - from guide rail - 2 - - arrows - and then remove.

NOTE: When installing end piece - 1 -, seal against guide rail with butyl adhesive sealing cord AKL 450 005 05.







- Using a screw driver, disengage rain channel - 1 - carefully on both sides at bearing on guide catch - 2 - and remove.







- Slide rear guide - 1 - in - direction of arrow - in guide rail - 4 - until the lock mechanism of guide catch - 3 - is released.
- Remove rear guide - 1 -, guide catch - 3 - and slotted guide rail - 2 - together out of guide rail - 4 -.

NOTE: Always replace guides and cable as a set.