Windshield Wiper System, Assembly
Windshield wiper system, assembly
CAUTION!
Before working on the electrical system:
- Determine the correct coding for the anti-theft radio.
- Switch ignition off.
- Disconnect the battery Ground (GND) strap.
- After reconnecting battery, re-code and check operation of the anti-theft radio.
1 - Wiper blade
- Adjusting rest position
2 - Wiper rubber
3 - Connecting lever
4 - Connecting rod
5 - Crank
6 - Wiper motor
7 - Hex nut M8
- 20 Nm (15 ft lb)
8 - Wiper frame
9 - Securing bolts M6
- 5 Nm (44 in.lb)
10 - Protective sleeve
11 - Cover cap
12 - Hex nut M8
- 20 Nm (15ft lb)
13 - Wiper arm
14 - Retaining clip