Reading

Read Measuring Value Block (Function 08)

Special tools and equipment

VAG 1551 scan tool with VAG 1551/3B cable

- Connect VAG 1551 scan tool. Refer to "Selectable Functions When Using VAG 1551", under "Restraint Systems", Scan Tool Connecting and Initial Checks
- Initiate Rear spoiler On Board Diagnostic (OBD). Rear Spoiler On Board Diagnostic (OBD), Initiating Program

The measured values in the functions "Read Measuring Value Block" and "Basic Setting" are described during the individual component test. This table serves only as on overview.

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -8- to select "Read measured value block" function 08.

Indicated on display


Rapid data transfer Q
08 - Read measured value block


- Confirm entry with -Q- button.

Indicated on display


Read measured value block HELP
Input display group number XXX


- Press buttons -0-, -0- and -1- to select function 001 and confirm entry with -Q- button.

Indicated on display: (1 to 4 = Display fields)


Read measured value block 1 ->
1 2 3 4


The explanation of the individual display fields on the display is found in the evaluation of display group numbers. Evaluating Measured Value Blocks


If the displayed values in all display zones are correct:

- Press -> button.

Indicated on display


Rapid data transfer HELP
Select function XX


NOTE: Check the DTC memory after completing the function "Read measured value block".