Input Shaft, Output Shaft, Differential and Selector Forks

5 Speed Manual 02J

Input Shaft, Output Shaft (Pinion Shaft), Differential And Selector Forks, Removing And Installing





1 Differential
- Disassembling and assembling
2 O-ring
- Qty. 4
- Always replace
3 Output shaft
- Disassembling and assembling
4 Reverse shaft support
- Disassembling and assembling
5 Reverse shaft
- Disassembling and assembling
6 Input shaft
- Disassembling and assembling
7 Reverse gear selector fork
- Disassembling and assembling
- Installation position
8 Torx socket-head bolt
- 25 Nm (18 ft. lbs.)
9 Selector mechanism (forks)
- Disassembling and assembling
10 Clutch housing
- Servicing
11 Nut
- 25 Nm (18 ft. lbs.) plus 90°
- Qty. 4 for bearing support
12 Flange shaft with spring
- Removing and installing
- Assembling
13 Cone-head bolt
25 Nm (18 ft.)