Inner Plenum Chamber Covers, Removing and Installing

Inner Plenum Chamber Covers, Removing And Installing

Removing







- Slide center cover - 1 - of plenum chamber out of locking mechanism toward front and remove from instrument panel - arrow -.







- Remove three bolts - 1 -.







- Lift left cover - 1 - of plenum chamber in center of instrument panel - arrow A - and thereby unclip (front edge clips, back edge clamps).
- Pull cover - 1 - toward vehicle center out of bracket underneath A-pillar - arrow B -.







- Lift right cover - 1 - of plenum chamber in center of instrument panel - arrow A - and thereby unclip (front edge clips, back edge clamps).
- Pull cover - 1 - toward vehicle center out of bracket underneath A-pillar - arrow B -.







- Remove attachment bolts from right end plate - 1 - and left end plate - 2 - and remove end plates upward from plenum chamber.

Installing
- Installation is performed in the reverse order of removal.