Headlights Assembly, Non-HID

Headlights, assembly







CAUTION!
Before working on the electrical system:
- Determine the correct coding for the anti-theft radio.
- Switch ignition off
- Disconnect the battery Ground (GND) strap.
- After reconnecting battery, recode and check operation of the anti-theft radio.

NOTE: After any measures/repairs which could affect the headlight aim, the headlight must be checked and if necessary adjusted.


1 - Gasket
- Replace if damaged
2 - Cover
Removing
- Up To 08.98
- From 09.98
3 - Retainers
- Qty. 4
4 - Headlight housing
- Up To 08.98
- From 09.98
5 - Gasket
- Replace if damaged
6 - Harness connector
- Clipped into headlight housing
7 - Electrical connector for high beam bulb
8 - High beam bulb
- H1 12 V, 55 Watt
- Replacing
9 - Electrical connector for low beam bulb
10 - Low beam bulb
- H1 12 V, 55 Watt
11 - Headlight glass
- Replace if gasket is faulty
- Removing: unclip retainers Pos. 3