Fuel Supply System Components, Removing and Installing

Fuel supply system components, removing and installing

Note:
^ Hose connections are secured with either spring or clamp type clips.
^ When replacing an existing clip, always use the spring-type clips.
^ Only secure fuel hoses in engine compartment with spring-type clips. The use of clamp or screw type clips is not permitted.
^ VAG1921 or VAS 5024 pliers are recommended for installing spring clips.

Observe safety precautions, Refer to Safety Precautions,Vehicle Damage Warnings
Observe rules of cleanliness, Refer to Observe rules of cleanliness
Observe Crash fuel shut-off, Refer to Inertia Fuel Shutoff Switch, Description and Operation
Throttle mechanism, servicing, Refer to Throttle Cable/Linkage,Service and Repair
Electronic accelerator control (EPC) components, servicing c Engine Code: AVH AZG), Refer to Throttle Cable/Linkage,Service and Repair
Throttle cable, adjusting (only Engine Code: AEG), Refer to Throttle Cable/Linkage,Service and Repair
Fuel tank component assembly, removing and installing, Refer to fuel tank, Service and Repair .
Evaporative emissions system, servicing, Refer to Evaporative Emissions (Evap) Systems, Service and Repair