Fuse Block: Service and Repair

Fuse panel and relay panel, removing and installing


CAUTION!
Before working on the electrical system:
- Determine the correct coding for the antitheft radio.
- Switch ignition off
- Disconnect the battery Ground (GND) strap.
- After reconnecting battery, re-code and check operation of the anti-theft radio.


Fuse panel, removing and installing


Removing







- Remove driver's side dash panel trim.
- Carefully pry on fuse panel cover from instrument panel.
- Remove both securing screws -1- and remove fuse panel -2- inward.


Installing

- Install in reverse order.