"Premium V" & "Premium V - Monsoon", Removing and Installing

Radio "Premium V" & "Premium V - Monsoon", removing and installing

Note: Before removing the radio obtain anti-theft security code from customer - vehicle papers. If the radio has been replaced, always activate the anti-theft coding. Be sure to advise customer of new security code.

Special tools, testers and auxiliary items needed




- Radio release tool T10057

Removing






- Slide radio release tool T10057 into release slots (arrows) until they engage.
- Pull radio out of instrument panel using grip rings of release tools.

NOTE: The radio release tool T10057 must not be pushed to the side or tilted. To remove the release tools from the radio the locating lugs on the side of the radio must be pressed inward.

- Disconnect electrical connections and antenna cable from rear of radio.

Installing

- Reconnect electrical connectors and antenna cable to radio.
- Slide radio level into instrument panel until it engages properly in assembly frame.
- Input anti-theft security code Page 91-25 .
- Confirm radio coding for sound system functions using On Board Diagnostic program function 07, "Code Control Module".

Note: Radio sound system coding must be performed to account for presence of CD changer (if installed), Monsoon system (where applicable) and interior sound field differences between models.