Compact Disc Player (CD): Service and Repair

CD Player, Removing And Installing

The optional single disc CD player (From 08.99) is mounted in the instrument panel in place of the storage bin.

It can be used in conjunction with the radio only or in conjunction with the radio and luggage compartment mounted multiple disc CD changer.

Switching functions between the CD player and CD changer are done manually on the CD player.

In the event both CD devices are installed, the CD player cable attaches to the radio and the CD changer cable attaches to the CD player.

Special tools, testers and auxiliary items needed.







- Radio removal tool 3316 (two identical pieces).

Removing
- First remove radio







- Insert tool 3316 into openings on face of CD player until they are felt to engage and then pull CD player from instrument panel opening using handles on tool 3316.
- Disconnect electrical connectors from rear of CD player.


NOTE:
- CD player must be pulled straight out from opening. Do not twist or tilt tool 3376 while removing.
- To remove tool from CD player, release locking tabs on side of radio when removed.
- Orientation of CD player and radio may not be as illustrated.


Installing
- Reconnect electrical connectors at rear of CD player.
- Insert CD player into instrument panel opening and push straight in until locking tabs engage.
- Attach CD player cable to radio.
- Reconnect remaining electrical connectors and antenna cable at rear of radio.
- Insert radio into instrument panel opening and push straight in until locking tabs engage.
- Input radio anti-theft security code .
- Check and code (radio) sound system functions if necessary using On Board Diagnostic program: "Code control module", function 07.