Overhaul
1. 55 Nm
2. Tensioner
- Secure with 3204 before removing; Removing and installing ribbed V-belt
3. Upper toothed belt guard, right
4. Toothed belt guard, center
5. Toothed belt
- Mark direction of rotation before removing
- Check for wear
- Do not kink
6. Upper toothed belt guard, left
7. 25 Nm
8. 25 Nm
9. Washer
10. Bearing bushing
11. Tensioner
12. Tensioning lever
13. O-Ring
14. 25 Nm
15. Bracket
16. Connection
17. Coolant pump
18. Oil pump
19. Cylinder head
20. Breather housing
21. Cylinder block
22. 45 Nm
23. Console
24. Sump
25. Idler roller
26. 45 Nm
27. Crankshaft toothed belt sprocket
28. 200 Nm + 1/2 turn (180°) further
- Always replace
- Do not add lubricant
- The turning further can be done in several stages
- The turning further angle can be checked with a commercial protractor e.g. Hazet 6690
29. Tensioning element
30. 10 Nm
- Install with D6
31. Fan retainer
32. M8: 25 Nm M6: 10 Nm
33. Toothed belt pulley guard
34. 10 Nm
35. Vibration damper
- When installing note fixing arrangement
36. 25 Nm