Fuel Supply System Components, Removing and Installing

Fuel Supply System Components, Removing And Installing


NOTE:
- Cylinder bank 1 is located on the right side when looking forward.
- Cylinder bank 2 is located on the left side when looking forward.
- Hose connections are secured with either spring-type or clamp-type clips.
- Always replace clamp-type clips with spring-type clips.
- Fuel hoses in engine compartment must only be secured with spring-type clips. The use of clamp or screw type clips is not permissible.







- The pliers VAS5024A are recommended for installing spring-type clips.

Observe safety precautions. Safety Precautions When Working on the Fuel Supply System
Observe rules for cleanliness. [1][2]Technician Safety Information.