Headlamp Switch: Service and Repair

Light Switch -E1-, Removing And Installing

Removing
- Turn rotary switch to "O" position.







- Firmly push rotary switch inwards -arrow 1- and turn slightly to right -arrow 2-.
- Hold rotary switch in this position and pull entire switch from opening in instrument panel trim -arrow 3-
- Return rotary switch to "O" position.
- Disconnect electrical connector.

Installing
- Connect electrical connector to switch.







- Hold switch housing firmly, push rotary switch inwards -arrow 1- and turn slightly to right -arrow 2-.
- Hold rotary switch in this position and insert entire switch into opening in instrument panel trim -arrow 3-
- Return rotary switch to "O" position to engage.