Seat Occupant Sensor: Service and Repair

Sensor For Side Airbag Driver/passenger, Removing And Installing







1 - Sensor driver/passenger side
2 - connector
3 - Bolt
- 6 Nm
4 - Carpet
- Battery Ground strap disconnected.
- Remove driver/or passenger seat (Use Airbag - Adapter VAS 5061)-carpet -4- and loosen dampening mats in area of sensor.
- Connector -2- disconnect and bolts -3- unscrewed.

Installation notes:
- Switch on ignition.
- Close doors.
- Connect battery Ground strap.


WARNING!
Make sure that no one is in the vehicle.