General Information

Radio, Removing And Installing

General information


CAUTION!
Before working on the electrical system:
- Determine the correct coding for the antitheft radio.
- Switch the ignition off.
- Disconnect the battery Ground (GND) strap.
- After reconnecting battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according to Repair Manual and/or Owner's Manual.


NOTE:
If radio is exchanged or replaced:
- Anti-theft security code for new radio must be entered before use. Be sure to advise customer of new security code.
- Confirm radio coding for sound system functions using On Board Diagnostic program: "Code control module"; function 07
- Radio sound system coding must be performed to account for presence of CD changer (if installed), Monsoon system (where applicable) and interior sound field differences between models.