Steering Column: Application and ID

Steering column, identification





For vehicles from my 02.2000, a new steering column manufactured by Krupp Presta is installed in left-hand drive vehicles. Steering column from Nacam is not installed any more.

The reach height and adjustment functions are the same for both steering columns.

Both variants are supplied as replacement parts.

When replacing a steering column, always use one from the same manufacturer as the original.

Before removing the steering column, be sure to identify which one was originally installed in the vehicle.

Identifying the steering columns

A - Steering column
Manufacturer: Nacam. For vehicles up to my 01.00

1. Transportation securing device
- Remove first after steering column is installed
2. Steering column
The steering column is not visible in area -2
3. Steering column universal joint shaft
4. Hex bolt
^ 25 Nm (18.4 ft. lbs.)
^ Installed without locking fluid

B - Steering column
Manufacturer: Krupp Presta. For vehicles from my 02.00

1. Transportation securing device
- Remove first after steering column is installed
2. Steering column
Column is visible in area -2-
3. Steering column universal joint shaft
4. Hex bolt
^ 25 Nm (18.4 ft. lbs.)
^ Installed with locking fluid
- Use locking fluid D 000 600