Transmission Selector Mechanism, Disassembling and Assembling

Transmission selector mechanism, disassembling and assembling
Special tools and equipment
^ VW402 Thrust plate
^ VW412 Press tool
^ VW421 Tube
^ VW423 Tube
^ VW432 Press tool
^ 3118 Tube
1 - Hex nut, 20 Nm
2 - Gear selector lever
3 - Shoe
^ Clip into relay lever -item 6 -
4 - Lock washer
^ Removing, Refer to Fig. 1
5 - Bushing
6 - Relay lever
7 - Selector mechanism cover
8 - Ball sleeve
^ For selector shaft
^ Removing, Refer to Fig. 2
^ Pressing in, Refer to Fig. 3
9 - Selector shaft
10 - 0-ring
^ Always replace
11 - 0-ring
^ Always replace
12 - End cover
13 - Oil seal
^ Pry out with screwdriver
^ Installing, Refer to Fig. 4
14 - Protective cap
^ For selector shaft
15 - Cap
^ For transmission breather





Fig. 1 Removing relay lever lock washer
^ Lift tab in direction of arrow.





Fig. 2 Pressing ball sleeve from selector mechanism cover





Fig. 3 Pressing ball sleeve into selector mechanism cover





Fig. 4 Pressing ball sleeve into selector mechanism cover