Installing Locations (ABS) Mark 60

Electrical/Electronic components and installing locations (ABS) Mark 60
1. ABS hydraulic unit -N55
- Can be checked using "guided fault finding" in VAS 5051
2. ABS Control Module (w/EDL) -J104
- Can be checked using guided fault finding in VAS 5051
3. Sender for rotation rate -G202-
- Can be checked using guided fault finding in VAS 5051
4. Sensor for transverse acceleration -G200-
- Can be checked using - guided fault finding in VAS 5051
5. Longitudinal acceleration sender -G251-
- All wheel drive vehicles with Haldex coupling only
- Can be checked using - guided fault finding in VAS 5051
6. ESP- Sensor unit -G419-, vehicles from my 02.02
- Combined sensor for transverse acceleration -G200-, sender for rotation rate -G202- and longitudinal acceleration sensor1) -G251-
- Assembled together in one housing
- Can be checked using "guided fault finding" with the VAS 505
1) 4Motion vehicles with Haldex clutch only
7. Sender 1 for brake booster -G201-
- Can be checked using - guided fault finding in VAS 5051
8. Brake booster
9. Steering angle sensor -G85-
- Can be checked using - guided fault finding in VAS 5051
10. Brake system vacuum pump -V192
11. Brake light switch -F-
12. Diagnostic connection
13. ESP button
- Vehicles with ABS/EDL/ASR/ESP only
14. ABS warning light -K47
15. Warning light for brake system -K118
16. ASR/ESP control lamp -K155
17. Right/left front speed sensor -G45-/-G47-
- Can be checked using - guided fault finding in VAS 5051
18. Wheel hub with rotor for speed sensors
19. Right/left rear speed sensor -G44-/-G46-
- Front wheel drive
- All wheel drive
- Can be checked using - guided fault finding in VAS 5051
20. Wheel hub with rotor for speed sensors
- Front wheel drive:
- All wheel drive:

Fig. 1 Diagnosis connection type I





Location: The diagnosis connection -arrow- is located behind the cover above the ashtray





Fig. 2 Diagnosis connection type 11