Evaporative Emission (EVAP) System Components, Servicing

Evaporative Emission (EVAP) system components, servicing

Note:
^ Components marked with an * are checked by the On Board Diagnostic (OBD).
^ Components marked with ** are checked by the Output Diagnostic Test Mode (DTM).
1. Leak detection pump (LOP) -V144- */**
2. Connector
^ 3 pin
3. Vacuum pipe
4. Vent pipe
5. To Evaporative Emissions (EVAP) Canister Purge Regulator Valve -N80
6. EVAP canister
^ In rear right wheel well behind wheel housing liner
7. 10 Nm
8. 3 Nm
9. Air cleaner for leak detection pump
10. Connecting hose
^ Suction side
11. Connecting hose
^ Pressure side