Reverse Gear Clutch to Large Sun Gear

Reverse Gear Clutch -K2- To Large Sun Gear, Removing And Installing





1 Reverse gear clutch -K2- Disassembling and assembling
2 Shim
^ Determining thickness refer to Clutch play between -K1- and -K2-, adjusting
^ 1 or 2 shims can be installed
3 1st to 3rd gear clutch -K1-
^ Spare part must comply with transmission code letters
^ Clutches -K1- and -K3- are pressed together
^ Disassembling and assembling
4 Seal
^ Always replace
^ To replace, press -K1- off -K3-
5 3rd and 4th gear clutch -K3- with turbine shaft
^ Spare part must comply with transmission code letters
^ Clutches -K1- and -K3- are pressed together
^ Disassembling and assembling
6 1st to 3rd gear clutch -K1- with 3rd and 4th gear clutch -K3-
^ Clutches -K1- and -K3- are pressed together
^ -K1- and -K3, pressing off
^ -K1- and -K3-, pressing on
7 Axial needle bearing with washer Axial needle bearing faces towards small input shaft
8 Small input shaft
9 Needle bearing
10 Axial needle bearing
11 Large input shaft
12 Axial needle bearing
13 Axial needle bearing washer
^ With shoulder
14 Large sun gear
15 Axial needle bearing
16 Axial needle bearing washer
17 Transmission housing with free wheel and circlips installed