Programming and Relearning

Cruise control system - 1.9L TDI engine, activating

If a Diesel Direct Injection Engine Control Module (ECM) has been replaced, it may be necessary to activate the cruise control function in the new ECM. Check system status and activate if necessary using the following procedure:
- Connect VAG 1551/1552 Scan Tool.
- Switch on ignition
- Press buttons 0 and 1 to select "Engine electronics" address word 01.

Indicated on display (example only)


038906018M 1,91 R4 EDC GOOSG 0602 ->
Coding 00001 WSC XXXXX


- If display shows "G00SG", on top line, cruise control is activated.
- If display shows "00SG", on top line, cruise control is not activated.

- Press -> button to begin activation sequence.

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons 1 and 1 to select "Login Procedure" function 11.

Indicated on display


Rapid data transfer Q
11 - Login-Procedure


- Press Q button to enter input.

Indicated on display


Login-Procedure
Input Code Number XXXXX


- To activate cruise control, enter code number 11463 (to deactivate, enter 16167)
- Press Q button to enter input.
- End output (function 06) and perform test drive to confirm cruise control functions.