Control Arm
Ball joint to control arm 20 Nm + 90° turn (15 ft. lbs. + 90° turn)
Use new bolts!
Front bolt for control arm 70 Nm + 90° turn (52 ft. lbs. + 90° turn)
Rear bolt for control arm
Use new bolts!
Connecting link to control arm 45 Nm (33 ft. lbs.)
Drive axle to drive flange
Socket head multi-spline bolt M8 x 18 40 Nm (30 ft. lbs.)
Socket head multi-spline bolt M8 x 28 40 Nm (30 ft. lbs.)
Socket head multi-spline bolt M8 x 49 80 Nm (59 ft. lbs.)
Socket head multi-spline bolt M10 x 20 80 Nm (59 ft. lbs.)
Socket head multi-spline bolt M10 x 48
Transmission support
^ Bolts -A-: 20 Nm (15 ft. lbs.) plus additional 90° turn
- Bolts -B-: 40 Nm (30 ft. lbs.) plus additional 90° turn
- Always replace bolts