Lower Intake Manifold Disassembling and Assembling

Intake Manifold Lower Part, Disassembling And Assembling (Vehicles With Engine Code BDC)






1 Fuel distributor with fuel injectors
2 Vacuum hose
- To upper part of intake manifold.
3 Wire routing
4 Seal
- Replace if damaged
5 Lower part of intake manifold
- with intake manifold change-over
6 to vacuum actuator
- on front side of intake manifold lower part
7 3 Nm
8 Intake Manifold Tuning (IMT) Valve -2- -N261-*
9 5 Nm
10 Washer
11 25 Nm
12 from upper part of intake manifold
13 Seal
14 2-pin connector
- For Knock Sensor (KS) 1 -G61-
15 3-pin connector
- For Camshaft Position (CMP) sensor 2 -G40-
16 2-pin connector
- for Intake Manifold Change-Over Valve -N156-