Fuel Distributor: Service and Repair

Fuel Distributor With Fuel Injectors, Disassembling And Assembling (Vehicles With Engine Code BDC)






1 Retaining clip
- Check for secure fitting
2 Return line
- blue or with blue marking
- secure with spring type clamps
- Check for secure fitting
- to Fuel Pump (FP) in fuel tank
3 Supply line
- black with white marking
- secure with spring type clamps
- Check for secure fitting
- from fuel filter
4 Fuel distributor
5 Air pipe
6 To intake hose
7 Air hose
- For air cleaned fuel injectors
8 Retaining clip
- Make sure clip is correctly seated on fuel injector and fuel distributor
9 Fuel injectors (-N30- through -N33-)*
- Air cleaned
10 O-ring
- Lightly lubricate O-rings with clean engine oil before installing
11 8 Nm
12 O-ring
13 Vacuum hose
- to upper part of intake manifold.
14 Fuel pressure regulator
- checking fuel pressure regulator and residual pressure.