Components of Fuel Supply System, Removing and Installing

Components of fuel supply system, removing and installing

Note:
^ Hose connections are secured with either spring-type or clamp-type clips.
^ Always replace clamp-type clips with springtype clips.
^ Fuel hoses of engine must only be secured with spring type clips. The use of clamp or screwtype clips is not permitted.





^ Fuel extraction unit VAS 5190 is recommended to empty fuel tank.





^ Always replace clamp-type clips with spring-type clips. Assembly tool VAS 5024 or hose clip pliers V.A.G. 1921 are recommended for installing spring-type clips.

Removing and installing fuel tank with attachments and fuel,Refer to Powertrain Management, Fuel Delivery and Induction, Fuel Tank, Service and Repair

Observe safety precautions, Refer to Powertrain Management, Fuel Delivery and Air induction, Service Precautions

Observe rules for cleanliness, Refer to Powertrain Management, Fuel Delivery and Air induction,Service and Repair

Servicing accelerator mechanism, Refer to Powertrain Management, Fuel Delivery and Air induction, Accelerator Pedal, Service and Repair

Observe crash fuel shut-off, Refer to Powertrain Management, Fuel Delivery and Air induction,Inertia Fuel Shutoff Switch, Description and Operation
Servicing parts of the evaporative emission system, Refer to Evaporative System, Service and Repair, Evaporative Emissions System, Servicing