Control Module Identification And Equipment

Control module identification
The control module version is indicated when the VAG1551 Scan Tool (ST), VAG1552 Scan Tool (ST) or the VAS5051 tester is connected and the control module for engine electronics is selected.

Equipment

Engine Code AWM

System identification Motronic ME7.5

Emissions limits according to ULEV

EPC system Yes

On Board Diagnostic (OBD) OBD II

Output Diagnostic Test Mode (DTM) Yes

Type of data transfer to VAG1551/1552 Rapid data transfer
Control module coding VAG1551/1552
VAS5051 tester
DTC memory Permanent memory1)

Memory for adaptation values Temporary memory2)

Oxygen sensor control 2 sensors

Knock sensor control 2 knock sensors

Intake manifold change-over No

Camshaft adjustment Yes

Charge pressure regulation Yes

Secondary Air Injection (AIR) system Yes

1) Independent of voltage supply.
2) Values are lost when voltage supply is interrupted.