Turn Signal Lamp: Service and Repair

Parking/turn Signal Light, Replacing


CAUTION!
Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that evaporates on the bulb during operation can cause the glass to cloud over.


Removing







- Unclip retainer -3-, pull latch -8- from guide and remove cover cap from rear of headlight housing







- Turn socket (with connector) -1- counterclockwise -arrow- and pull from housing.
- Remove bulb.

Installing
- Install bulb.
- Reinstall socket (with connector) into headlight housing. Lock socket in place by turning clockwise.
- Reinstall cover cap.
- Check parking / turn signal light (bulb) function.