Seat Cushion Extension, Removing and Installing

Seat Cushion Extension, Removing And Installing

Removing
- Remove Recaro seat.







- Using pliers or a screwdriver, push both springs - 2 - inward - arrows -.
- Pull seat cushion extension - 1 - out of seat.
- Disconnect wiring harness for vehicles with seat heating.
- Fold front cover - 3 - up and feed cable through.

Only for later removal of seating area
- Loosen cover - 3 - from seat.
- Push guide sleeves - 4 - together, using appropriate pliers.
- Remove guide sleeves from seat.

NOTE: Guide sleeves - 4 - must be replaced when installing.

Installing
Installation is performed in the reverse order of removal.