Selectable Function When Using VAG 1551/1552 or VAS 5051

Overview Of Selectable Functions

01 - Check Control Module Version
02 - Check DTC Memory
03 - Output Diagnostic Test Mode
05 - Erase DTC memory
06 - End Output
07 - Code Control Module
08 - Read Measured Value Block
10 - Adaptation


NOTE:
- A list of possible functions is printed out after pressing the HELP key.
- Do not select further functions, which can be printed out after pressing the HELP key.
- After the function is completed the VAG 1551 returns to the following start position:

Indicated on display


Rapid data transfer HELP
Select function XX