Auxiliary Fuel Tank, Removing and Installing

Auxiliary fuel tank, removing and installing







1 Auxiliary fuel tank
2 Locking ring, 145 Nm
- Check for secure fitting
- Use wrench 3087 to remove and install
3 Supply line
- to filler fuel tank filler tube, item 19
- Check for secure fitting
- To disengage, squeeze together at front
4 Fuel pump
- 6-pin connector
- Note installation position at auxiliary fuel tank Fig. 1
- with Fuel Pump (FP), auxiliary fuel tank (Transfer Fuel Pump (FP) -G23-)
- with Auxiliary Tank Fuel Level Sensor -G292-
5 Seal
- Replace if damaged
6 Sleeve
7 Connection hose
- to connection sleeve at fuel tank, item 19
- Check for secure fitting
8 Vent line
- to connection sleeve at fuel tank filler tube, item 20
- Check for secure fitting
- secure with spring type clamps
9 23 Nm

Fig. 1 Installation position of Fuel Pump (FP) flange at auxiliary fuel tank







Marking on flange -1- must align with hole on auxiliary fuel tank -2-.