Headlamp Alignment Switch: Service and Repair

Headlight Adjuster -E102-* With Instrument Panel Light Dimmer Switch -E20-, Removing And Installing

Proceed as follows:

Removing
- Remove driver's side lower instrument panel trim.
- Disconnect electrical connection.







- Depress locking tabs -arrows- to release switch.
- Pull switch -A- through instrument panel frame from behind and remove.

Installing
- Install switch from behind instrument panel frame and line up with guide piece.
- Clip switch into place until locking tabs engage.
- Reconnect electrical connection.
- Reinstall instrument panel trim.
*) If equipped