Vehicle Damage Warnings

Rules of cleanliness

When working on the fuel supply or fuel injection systems, the following 5 rules of cleanliness should be carefully observed:
- Thoroughly clean all connections and the surrounding area before disconnecting.
- Place parts that have been removed on a clean surface and cover. Use lint-free cloths only!
- Carefully cover over opened components or seal, if repairs are not carried out immediately.
- Only install clean components: Only unpack replacement parts immediately prior to installation. Do not use parts that have been stored loose (in tool boxes etc.)
- When the system is open: Do not work with compressed air if it can be avoided. Do not move vehicle unless absolutely necessary.