Steering: Testing and Inspection

Steering system checking for leaks

Note: After completing repairs if hydraulic oil level is low the steering system must be checked for leaks.

- Start engine.
- Turn steering from lock to lock and hold briefly.
The maximum possible pressure is then produced.
In this position the following components must be checked for leaks:
- Pinion seal on steering gear valve housing.
- All line connections
- Rack seals
This check can only be carried out when the boot is pushed back.
- Open boot hose clip.
- Push boot back.
Steering gear must be replaced if oil is visible in steering gear housing and/or in the boot.