Bonded Rubber Mounting For Cross Member in and out, Pressing

Bonded rubber mounting for cross member in and out, pressing
Special tools and equipment required





- VW401 Thrust plate
- VW 412 Press tool
- 2039 Tube
- 3053 Guide sleeve





Fig. 1 Installation position of bonded rubber mounting in cross member
- Mark installation position -arrows- with for example a felt tip pen.





Fig. 2 Pressing bonded rubber mounting out of cross member





Fig. 3 Pulling bonded rubber mounting into cross member
- Position bonded rubber mounting so that one of the rubber nipples -1on illustration N42-0225 aligns with marking -arrow-.