Rubber Mounting For Final Drive Support, Pressing

Bonded rubber mounting for final drive support in and out, pressing
Special tools and equipment required





- VW401 Thrust plate
- VW 412 Press tool
- 2039 Tube
- 3053 Guide sleeve





Fig. 1 Mark installation position of bonded rubber mounting
- For example, mark installation position -arrow A- with a felt tip pen.





Fig. 2 Pressing bonded rubber mounting out of transmission support





Fig. 3 Pressing bonded rubber mounting into transmission support
- Position bonded rubber bearing so that one of the rubber nipples -1 arrow B- on illustration N42-0214 aligns with marking -arrow A-.