Fuel Filter: Service and Repair

Removing and installing fuel filter







1 Banjo fitting, 30 Nm
2 Seal
3 Supply line
- Black
- Check for secure fitting
- secure with spring type clamps
- from Fuel Pump (FP), item 3
4 Direction of travel
5 Screw clip
6 Fuel tank
7 2 Nm
8 Banjo fitting, 23 Nm
9 Connecting piece
10 Supply line
- Black
- Check for secure fitting
- secure with spring type clamps
- to fuel supply line at fuel distributor (cylinder bank 1)
11 Fuel filter
- Note installed position Fig. 1

Fig. 1 Installation position of fuel filter







1 Direction of travel
2 Connection:from Fuel Pump (FP)
3 Screw clip
4 Fuel filter Installation position: Arrow points in direction of flow
5 Connection:To fuel supply line at fuel distributor

Installing
- Install fuel filter so that the measurement is a = 32 to 36 mm.