Transmission Position Sensor/Switch: Service and Repair

Multi-Function Transmission Range (TR) Switch-F125-, replacing
Removing
- Remove left wheel.
- Remove left-hand transmission bracket.
- Unscrew bolts and detach multi-function TR switch -F125- from transmission; pull switch off selector shaft.

Installing
Place multi-function TR switch -F125 centered on selector shaft. Do not cant or use force when installing. Danger of damaging switch contacts.





- Fit multi-function TR switch -F125- on selector shaft: flat section in splines in switch -3- must coincide with flat section on selector shaft -1-.
- Turn switch so that hole -4- on switch housing can be fitted on locating pin -2- on transmission housing.
- Bolt multi-function TR switch -F125- to transmission and tighten.
- Install left-hand transmission bracket.
- Remove left wheel.